Infinity-ID 48″ Features:
![]() | 48″ (1220mm) |
---|---|
![]() | No – Alternate model is available with light |
![]() | Suitable for raked ceilings up to 7 degrees |
![]() | DC Wall Controller |
![]() | No |
![]() | Indoor, Outdoor (Undercover), Coastal |
![]() | DC |
Click on the ‘additional information’ tab for detailed features and specifications
The Infinity-ID includes an innovative DC wall controller with six speeds. This DC controller is unlike most traditional wall control units that usually feature only 3 selectable speeds. Fanco’s wall control unit also does not need to be hardwired unlike most DC fan wall controls – so no batteries required! Please note that this Wall Control version of the Infinity-ID is not reversible or compatible with the LED light kit.
This fan is without light however a model including a CCT LED light with SMART / Remote is also available. Please see alternative listings.
This fan utilises a DC motor, however has an internal inverter and thus is compatible with normal AC electrical systems. Cannot be connected directly to a DC power source.
Infinity-ID DC Performance Data
Rpms | Watts | Airflow (m3/hr) | |
Speed 6 | 230 | 21.3 | 9,411 |
Speed 5 | 203 | 15.0 | 8,367 |
Speed 4 | 175 | 10.6 | 7,524 |
Speed 3 | 146 | 7,6 | 6,259 |
Speed 2 | 118 | 5.7 | 5,646 |
Speed 1 | 90 | 4.3 | 4,453 |
* These figures are provided by the manufacturer
Please note that the wall controller requires a specific and accurate hole size in the plasterboard/gyprock. Please view the fanco recommended installation guide for more information.
As the face of this wall controller is 85mm square, if you are replacing a standard sized wall control you may need to patch the hole or install a blank plate and install this controller next to it. We would recommend discussing with your installing electrician prior to purchasing to determine suitability.
Allan –
installed and working in no time
Allan –